Open the Routers Setup Page

In this post we will see how to open the Cisco Valet, Valet Plus or Linksys E-Series router's web based Setup Page. All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

 NOTE: Before accessing the router’s web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or4 ).

Step 1:
Open a web browser such as Internet Explorer.
Step 2:Go to the Address bar and enter your router’s IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE: If the IP address of the router has been changed, type the router’s IP address in the Address bar instead.

The router’s IP address can be changed by:

1. Running the router’s setup CD.

2. Changing it on the router’s web-based setup page.

If you forgot the router’s IP address you can Reset the router by the Reset button at the back of the router for 30 seconds.

NOTE: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router’s IP address will be "192.168.1.1" and the password will be "admin".

Step 3:A new window will prompt for a User name and Password. Leave the User name field blank then enter your router’s password ("admin" is the default password), then click OK.
 

If you forgot the router's password you need to reset the router.

Windows XP


                                   
Windows 7

NOTE: If the password of the router has been changed, type the router’s new password in the Password field instead.

Cisco Valet Limited Warranty and Support.

Here is the much awaited post for Support and Warranty information on Valet products. This post is published on 25th September 2010. The Support and Warranty policies might change for the Valet devices in future. As of now mentioned below are the terms and conditions for Support & Warranty for the devices.

Valet Limited WarrantyCisco Valet Products come with a limited warranty that covers your hardware against defects in materials and workmanship for one year.  Complete details and limitations can be found in the Supplemental Information document on the Easy Setup Key and on the website.

• 1 Year Limited Warranty

Valet Support

• Online Support Resources
• 1 Year Complimentary Assisted Support
• Support Offerings

Valet Support
Online Support ResourcesCisco's Award Winning online support resources are available 24/7:

• Guide Me
• FAQ
• Community Forums
• Live Chat

Complimentary Assisted Support
Cisco Valet products are eligible for Complimentary Assisted Support for 1 year.  Assisted Support includes technical phone support and live chat.

Support Offerings
Rest easy, knowing that technical support is always just a phone call or click away, no matter how long you’ve had your product.  Our award-winning phone support and web-based resources can get you back up and running even beyond your Complimentary Assisted Support period. 

Phone Connect (US only)
Talk with one of our expert phone technicians.  They’ll help you set up or troubleshoot your home network over the phone.  We’ll make our best effort to resolve your problem.  

• One-time phone call (no time limit)
• The technician will try to resolve your problem
• One-time Phone Connect call: $29.99

Phone Connect-6 (US only)
Have you ever thought of that perfect question just after you hang up with the service technician?  With Phone Connect-6, that’s not a problem.  Phone Connect-6 lets you make up to 6 phone support calls within a six month period (whichever comes first).  That means you can call back up to five times within six months for no additional charge!

• Up to 6 technical support phone calls for six months (whichever comes first, starting on the date of your first call)
• Program covers a single device
• The agents will try to resolve your problem
• Up to 6 calls or six months (whichever comes first): $39.99

For better performance in Range and Connectivity, use the Valet Connector with the Cisco-Valet Plus Wireless Router.

How to upgrade firmware for Valet or Linksys E-Series.

Always upgrade the firmware or any linksys device with the computer connected with an ethernet cable to the Router / Modem / Access Point / Range Expander or any other device.

A firmware upgrade is recommended on the Valet or Linksys E-Series if you are experiencing the following:
- Intermittent or slow performance
- Your Valet or Linksys E-Series freezes unexpectedly
- Your Internet connection frequently gets disconnected

Follow these steps to upgrade the firmware.

Step 1:
Using your preferred Internet browser, navigate to http://homesupport.cisco.com.

Step 2:
Once you’re on http://homesupport.cisco.com, enter the model number of your product, in the Search Support field located on the upper left corner of the page. Click on the arrow icon to continue.

 

Step 3:

On the next page, click on the Downloads tab under Support Sections.

Step 4:
Select your Valet or Linksys E-Series hardware Version from the Select Hardware Version drop down menu.

NOTE: It is important that you select the correct Hardware Version for your Valet or Linksys E-Series product. Click on the Where’s my model number link to learn how to locate your Hardware Version.

Step 5:
After selecting your Hardware Version, click on the Download link under the Firmware section.

Step 6:
A File Download window will now appear. Click on the Save button.

Step 7:
In the Save As window that appears, specify a folder or location to place the file in, then click on the Save button at the bottom right.

Step 8:
Once you have downloaded the firmware, launch Cisco Connect. Click Valet settings if you’re using a Valet, or Router settings if you’re using a Linksys E-Series.

NOTE: To launch Cisco Connect on a Windows computer, go to Start>All Programs>Cisco Connect.
             To launch Cisco Connect on a Mac computer, navigate to the Applications folder in Go, and then start Cisco Connect.

Now you have the firmware so follow the steps below
Step 1:
When you see the Router settings or Valet settings screen, click Advanced settings.

Step 2:
At the Advanced settings screen, click Copy password then click OK. It will bring you to the Web-based utility of your Valet or Linksys E-Series.

Step 3:
When you are prompted for User Name and Password, enter “admin” as User Name and right-click and select Paste to paste the password you have copied earlier. Then click OK

Step 4:
You will now see the Web-based utility. Select Administration and click Firmware Upgrade.

Step 5:
To start firmware upgrade process, click Browse and select the .bin file that you downloaded earlier.

Step 6:
After selecting the .bin file, click on the Open button at the bottom right.

NOTE: The file name may vary based on the product model.

NOTE: If you are using a Mac, your screen should look similar to the screenshot below. Select the .bin file and click on the Choose button.

Step 7:
After selecting the file, click Start Upgrade

Step 8:
Once the upgrade is successful, the following message will appear:

How to forward ports on E2000

The screenshot displayed here is of E2000 router with firmware v1.0.00
For other firmwares too the interface is pretty much same.

Click on Applications and Gamings tab and do the following.