Error GTgina.dll while installing or using the linksys wireless adapter.

If ever you face an error regarding GTgina.dll, DO NOT PLAY WITH THE REGISTRY as i have seen in many support forums they encourage you to do this.


There is a simple workaround for this.


Follow these steps and your issue should be resolved.



  1. Most of the times, this error occurs with the compact series of the linksys adapters.
  2. Create a restore point on the computer.
  3. Uninstall the linksys utility for the compact wireless adapter.
  4. Unplug the adapter. Restart the computer.
  5. If you have the disk that came along with the adapter, insert the disk. The disk contains the drivers for the adapter.
  6. When the disk starts the auto play, close the window.
  7. Insert the adapter. Follow the Windows 'Found new Hardware' wizard and install the drivers for the adapter. If the computer/laptop is connected to the internet (router/modem) with a cable, you can go online and install the drivers from the internet. It doesn't really matter how you install the drivers. Installing them is important!
  8. Once the adapter is installed, take the disk out and keep it safe. I recommend to copy the drivers folder onto your hard disk (as a backup). Its not necessary but restart the computer when the adapter is still connected.
  9. After the computer restarts, try connecting to any wireless network, once connected check the signal strength. Unplug the ethernet cable and see if you can go online wireless.
  10. This should resolve the GTgina error.
Never play with the registry by reading any posts on the internet. Registry is the heart of windows base computers. Even if there is a need and you think you are an expert, ensure that you take a backup of the registry incase you screw anything.

The above mentioned troubleshooting applies to almost all wireless adapters from linksys. If you are using a Linksys N-series router, and your computer or laptop doesnt have a N-series adapter, you will be able to surf wireless only with the limited G-Series speed. For better reception and a stable connectivity, consider purchasing an N-series adapter from Linksys. Also I recommend to secure your wireless connection. The adapters from Linksys support all kinds of wireless securities. If there are any issues regarding the wireless connection dropping, try changing the channel on the wireless router. Also I do insist on upgrading the firmware on the router. Follow these steps to upgrade the firmware.
I am in the process of creating a good website for Linksys and Netgear. Will post the link when Im done with the website. Comment here if there is anything I've missed.

WAP200E Reviews and Purchase.

Weather-resistant housing allows for outdoor deployments, and Power over Ethernet (PoE) functionality frees the device from proximity to an electrical outlet. Its RangeBooster technology reaches up to twice as far as standard 802.11g, with reduced dead spots and improved throughput up to 35 percent.
Additional features of the Cisco WAP200E Wireless-G Exterior Access Point include:
  • Multiple BSSIDs that connect to individual VLANs to keep traffic separated
  • NEMA IP53-rated weather-resistant, lighting-protected housing
  • Support for both WEP and WPA security protocols, which keeps your wireless transmissions safe using powerful encryption
  • MAC address filtering
  • Improved Quality of Service (QoS) over wireless connections for better video and voice performance
  • Multiple BSSIDs, wireless roaming, auto-channel selection, and load balancing
  • A browser-based configuration utility
  • Limited lifetime warranty

How to install WUSB600N driver for Windows 7?

To Install the driver for WUSB600N on Windows 7 follow the steps listed below. You need to download and extract the drivers for WUSB600N.


1. Connect the adapter to the Computer
2. It will display you the Message "Found New Hardware"
3. Select the Option "Browse My Comptuer for Driver Software" and click Next.
4. Click Browse and select the Folder where you have extracted all the Files on  your Computer and click OK.
5. Click Next.


This will Install the Drivers for your Adapter. Once installed sucessfully. Search for your Wireless Network and click on Connect. If the wireless network is secured, enter the security key or the Passphrase and click Connect.


Once connected, check if you are able to go online.


Well you should be.


This article applies to Windows 7 and Windows Vista.

How to Connect to Tiscali DSL in the Netherlands


In order to connect to the Tiscali DSL network in the Netherlands, please make sure you are using the most recent firmware for your Linksys ADSL modem or gateway.  Recommended firmware versions can be found in the table below.
 
For Instructions on Upgrading Firmware on a Linksys Router, Click here.

Device  Minimum firmware version required
 AG241 v2
 2.01.0
 WAG54G v2 Annex-A
 1.02.0
 WAG54G v2 Annex-B
 1.01.17
 WAG54GX2 Annex-A
 1.00.6
 WAG54GX2 Annex-B
 1.00.3
 WAG54GS Annex-A
 1.00.10
 WAG54GS Annex-B
 1.00.7
 WAG200G Annex-A
 1.00.9
 WAG354G v1 Annex-A  
 1.01.09
 WAG354G v1 Annex-B
 1.01.09
 WAG300N Annex-A
 1.01.01



After upgrading your firmware, follow these steps:

  1. After upgrading your firmware, reset your modem or gateway by holding down the Reset button for approximately 15 seconds. 

  2. Access the web-based Setup utility located at  http://192.168.1.1. (Type these numbers in the address bar of your favorite browser)

  3. When prompted, enter "admin" for username and "admin" for the password.

  4. When the Setup page appears, you will need to enter the correct settings to connect to the Tiscali network.  The settings you should use are as follows:

    Encapsulation:  RFC1483 Bridged
    Multiplexing:  LLC
    VPI:  0
    VCI:  34
Example:
(menu style and options will vary by model and firmware version)


Ayboll