Firmware released for WRT54GS v5, v5.1 and v6.
Firmware : 1.52.6
Download here.


Firmware for WRT350N
Firmware : 2.00.19
Doenload here.

Difference in PAP2 and PAP2 v2

Difference in PAP2 and PAP2 v2. the Figure below Describes the difference in PAP2 and PAP2 version 2.

Settings for XLN Telecom with Linksys Modem.

Settings for XLN Telecom with Linksys Modems

Encapsulation : RFC 2364 PPPoA.
Multiplexing : VC
QoS : UBR
VPI : 0
VCI : 38

Username : is provided by XLN Telecom
Password : is provided by XLN Telecom

Settings for Entanet

Settings for Entanet with Linksys Modems :

Encapsulation : RFC 2364 PPPoA
Multiplexing : VC
VPI : 0
VCI : 38
Username : Provided by Entanet/Orange
Password : Provided by Entanet/Orange

Linksys WUSB600N Wireless USB Network Adapter

The Ultra RangePlus Dual-Band Wireless-N USB Network Adapter is the simple way to add or upgrade wireless connectivity in your desktop or notebook computer. Just plug it into your computer's USB port and enjoy incredible high-speed wireless network access. The Dual-Band Wireless-N USB Network Adapter uses Wireless-N (draft 802.11n). By overlaying the signals of multiple radios for each band, Wireless-N's "Multiple In, Multiple Out" (MIMO) technology multiplies the effective data rate. Unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce "dead spots" in the wireless coverage area. The robust signal travels farther, maintaining wireless connections much farther than standard Wireless-G. And with Wireless-N, the farther away you are, the more speed advantage you get. It works great with standard Wireless-G, -A, and -B equipment, but when both ends of the wireless link are Wireless-N, the throughput can be increased even more by using twice as much radio band.

Reset PSUS4

Follow these steps to reset the PSUS4 :

1. Unplug the PrintServer.
2. Press and hold the Reset button. While pressing the button, plug in the PrintServer.
3. Continue pressing the button for 10 seconds, and the PrintServer will be reset to factory defaults.



After this, PSUS4 will be a DHCP client, then it shoule be able to get a new IP Address from your new router.

EC1000 : Gigabit ExpressCard Adapter

EC1000 : Gigabit ExpressCard Adapter

Give your laptop Gigabit speed capability. Just slide in the Gigabit Express Card Adapter and get ready to connect with lightning-fast speed and solid stability over almost any Gigabit network.

The adapter’s Gigabit port lets you connect to Gigabit networks with ultra-solid hard-wire
stability at fast speeds. Great for even the most bandwidth intensive activities, like high definition video, high-quality media publishing, high-capacity networking, file sharing and data-basing.

Installs in ExpressCard/34 or /54 slots. Auto-sensing technology automatically detects the
connected network’s speed and adjusts to let you connect at 10, 100 or 1000 Mbps.

Integrated pop-up connector folds flat when not in use—no dongles to break or lose. Low
power consumption goes easy on your laptop battery.

Features
• Compliant with ExpressCard standard
• ExpressCard interface with 2.5Gbps signaling
• 10/100/1000Mbps data rate auto-negotiation
• Automatic MDI/MDIX crossover at all speed
• Compact and robust design perfect solution for all network users, both desktop and mobile
• Wake On LAN (WOL) power management support*
* PC must support WOL for this feature to function

________________________________________

Specifications
Model EC1000
Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z
Ports 1 RJ-45 Ethernet port
Cabling Type Category 5e or better
LED Indicators 10/100/1000
Connector Type RJ-45, PCI-Express


Environmental
Dimensions
1.3" x 0.2" x 4.25" (34 x 5 x 108 mm)
Unit Weight 0.88 oz (25 g)
Power 3.3V Power Consumption:
Active: Tx: 600 mA (Maximum
Rx: 600 mA (Maximum)
Idle: 150 mA (Maximum)
Certifications FCC Part15 Class B /CE/VCCI and ICES-003
Operating Temp. 32 to 104ºF (0 to 40ºC)
Storage Temp. 32 to 158ºF (0 to 70ºC)
Operating Humidity 0% to 90% Noncondensing
Storage Humidity 0% to 90% Noncondensing

Package Contents
• EC1000 Gigabit ExpressCard Adapter
• Start Here Folder with Setup Wizard CD
• Network cable

Minimum Requirements
• Notebook with PCI-Express slot
• Windows 98SE/ME/2000/XP
• CD-ROM Drive

Ayboll