Configure WVC54GC with Belkin Router !


How to Configure WVC54GC with a Belkin Router.

  • The Linksys camera's Default IP Address is 192.168.1.115.
  • The Belkin Router's Default IP Address is 192.168.2.1
  • First, connect a computer to the camera with an Ethernet cable.
  • Assign a Static IP Address to the computer : 192.168.1.10
  • The Subnet Mask should be 255.255.255.0
  • Default Gateway is not necessary.
  • Open Internet Explorer, in the Address Bar type 192.168.1.115
  • The Username and passwod is admin.
  • On the setup page of the camera, click Setup.
  • Change the IP Address to 192.168.2.115 [ from 192.168.1.115 ].
  • In the Gateway, type the IP Address of the Belkin router [192.68.2.1].
  • In the Wireless settings, put the SSID and security Exactly similar to that of the Belkin router.
  • Network Type : Infrastructure. Save Settings. Remove the static IP from the computer.
  • Powercycle the network. Port 1024 needs to be forwarded on the Belkin router.



It should work. :)


1 comment:

  1. Oh my god! That worked. I was about to send this camera back because nothing I found on the Linksys website helped, but your suggestion did it. Your awesome!

    ReplyDelete

Ayboll