New Firmware Released for WAG160N.
Firmware Version : 1.00.09 (ETSI)
Release Date : 23 May, 2008
Fixes :
- Fixes issue with FTP failure after 2 days.
- Fixes issue with Cisco IPSec client
- Fixes issue with slowdown when using Azureus in MAC OS
- Fixes issue with SIP registeration when WAN IP Address changes
- Fixes issue with WUSB300N client over WPA-TKIP
- Change GUI display
Click here to download the firmware.
p2p clients still crash dsl connection each 2 minutes even with low maximun clients set to 100 in a 12000/512 kb adsl line
ReplyDeleteI have just returned two WAG160N units that would hang after 1 hour. No need to connect to DSL, would just hang anyway with LAN connection. Linksys confirmed this to be an issue with current 1.00.09 firmware and that they are working on a fix but no dates yet. I returned them to the retailer and got a full refund. Linksys says they dont refund but in Australia at least that position is illegal.
ReplyDeleteAs per previous comments, I also have the problem that my WAG160N reboots continuously after installing ver 1.00.12 and keeps disconnecting from our Vista Laptops, have gone back to my old router till there is the possibility of a patch!!
ReplyDeletereturning this product today, very very bad products. Heaps of problems with VOIP and connection stability
ReplyDeleteThis product is very leak : Impossible to get snmp traps, unstable dsl connection, too much heat, not rectangular box, etc... Seems Cisco is not concerned by Linksys brand, or boxes from Internet providers let a too thin market ti justify good products. I am going back to draytek vigor or any other.
ReplyDeletePierre http://www.tsmservice.fr
I am sure this post has touched all the internet viewers, its really really good paragraph on building up new
ReplyDeleteweb site.
Here is my homepage : Visual Impact Muscle Building Review